Proton
Subatomic particle, part of the atomic core. It carries a positive electric charge.
This article is a copy of the old version of my site.
I plan to rewrite it to source it better and make it more readable.
So please bear with me 🙂
It is important to differentiate between the atomic fission currently used in our power plants and atomic fusion.
Fission consists of breaking heavy and unstable atoms, such as uranium, in order to release energy in the form of kinetic energy transmitted in the fission products. This kinetic energy is quickly converted into heat, which is used to transform water into steam to drive a turbine that produces mechanical energy, which is then converted into electricity via an alternator.
With fusion, light atoms, such as hydrogen, are joined together to form heavier ones. To do this, enough energy must be injected into the particles to overcome the strong nuclear force, which tends to push the nuclei together, to make them fuse. The result is an unstable nucleus that breaks into several pieces while releasing kinetic energy in the same way as with fission. In a fusion power plant, electricity would then be produced in the same way as it is now in our fission power plants.


But while atomic fission creates highly unstable, and therefore radioactive, waste over very long periods of time, atomic fusion produces very little (only the structure receives neutrons and becomes moderately radioactive). It is impossible for a fusion reactor to create incidents like Chernobyl, because there is no question of a chain reaction, the slightest dust in the system will stop the process dead in its tracks. There is no question of creating weapons either, it is simply impossible. This method of energy production is therefore risk-free, has little impact on the environment (since it does not emit CO2 or untreatable waste) and is virtually inexhaustible!
Another advantage is that the efficiency of fusion is higher than any other process currently used on Earth. It releases an energy nearly four million times greater than that generated by chemical reactions such as the combustion of coal, oil or natural gas and four times greater than that of nuclear fission!
But what does this have to do with astronomy? Well, in reality, nature on Earth has been using atomic fusion for about 4.5 billion years to heat itself via the Sun. Thanks to its very large mass, the pressure in its center is high enough for large quantities of hydrogen atoms to fuse into helium, releasing many energetic photons. These photons then hit the surface of the Earth bathing us in light and heat (the atoms of our body absorb the photons which transmit their energy to us.
ITER (Latin for "path"), for International Thermonuclear Experimental Reactor, is an experimental nuclear fusion reactor project located in Cadarache, France. It is one of the most ambitious energy projects in the world. It is the result of the collaboration of thirty-five countries working together for a common goal: China, the countries of the European Union with Switzerland and the United Kingdom, India, Japan, South Korea, Russia, and the United States. The EU contributes 45.5% of the construction cost, with the other countries sharing the rest with 9.1% each. The contributions are mainly in kind (equipment and components). The total cost of the operation estimated by the EU is 13 billion euros.
France alone is responsible for 20% of the European participation, which is as much as the other non-EU countries (9.1% of the total). As the host country, it is responsible for all the work involved in setting up the Cadarache research center. Welcoming people from all over the world with their families, it has also created an International School for the children of the staff.


The goals of ITER are to prove the profitability of this energy by facts. By producing 500 MW of energy for every 50 MW injected, in order to reach a temperature of 150 million degrees Celsius (for comparison, this represents 10 times the temperature at the heart of the sun), the reactor will reach, and even exceed, the energy balance point by producing more energy than it consumes (by a factor of Q=10). Currently the record for this ratio is held by the JET (Joint European Torus), during the 90's, with a factor Q=0.67.
The centerpiece of ITER is the tokamak, the acronym tokamak comes from the Russian "тороидальная камера с магнитными катушками" (toroidalnaïa kamera s magnitnymi katouchkami: in French, chambre toroïdale avec bobines magnétiques). A tokamak is a torus (a doughnut if you prefer) designed to magnetically confine a plasma for the purpose of fusion operations. Plasma is the fourth state of matter, along with gas, liquid and solid. When a gas is subjected to extreme temperatures, it turns into a plasma: the electrons of the atoms are torn off. The result is a soup of overexcited electrons in which the nuclei of naked atoms are bathed.


The structure is composed of 10,000 tons of superconducting magnets, cooled to a temperature of 4 K (-269 °C), surrounding a vacuum chamber with a volume of 840 m³, the interior of which will be covered with high-strength protective tiles collecting the heat produced by the fusion. The divertor, located on the "floor" of the vacuum chamber, has the task of extracting impurities from the chamber. It is made up of 54 cassettes, each weighing 10 tons and made of tungsten.
The whole thing will weigh no less than 32,000 tons and will break many records: the largest magnetic system, the largest stainless steel vacuum chamber, and especially the largest tokamak ever built in the world!
ITER will operate by fusing two isotopes of hydrogen: one of deuterium (one proton and one neutron) and one of tritium (one proton and two neutrons). This is currently the most efficient mixture for producing energy.
Deuterium is obtained by distilling water. Each cubic meter of seawater contains 33 grams of deuterium, which means that this resource is almost inexhaustible.
Tritium, on the other hand, is unstable and is only present in nature in trace amounts. However, we are able to make it by making lithium (three protons and three neutrons) interact with a neutron. Lithium can be extracted from mines or from sea water in sufficient quantities to cover the energy needs of the planet for ~ 6 million years, which is no small feat!
ITER will initially draw on the world's reserves of tritium. But in order to foresee what will happen next, the production of this chemical element will be tested directly in the machine's enclosure. Since fusion reactions produce a lot of neutrons, the protective tiles that line the inside of the tokamak will incorporate lithium that will interact with them. The tritium will then simply be extracted and reinjected into the machine. Future fusion power plants will thus be able to produce their own fuel.


Several heating techniques will be used to bring the core of the machine to a temperature of 150 million degrees Celsius. First of all, the induction effect of the electromagnetic field will produce a high intensity electric current which will circulate in the plasma and will excite the particles, producing heat thanks to the collisions. But this will not be enough to reach the right temperature. High-energy particles will therefore be injected into the plasma where, through rapid collisions, they will transfer their energy to the particles already present. To this will be added the use of a heating method similar to that of microwave ovens. High frequency waves will be used to excite the particles in the plasma. Three waves of different lengths will be used to target the ions (nucleus of an atom without its electrons) of deuterium and tritium as well as the electrons.
Eventually, it is expected that the energy released by the fusion reactions will be sufficient to sustain the process by itself.
No material could withstand the temperature of 150 million °C. This is why the plasma will be confined within an electromagnetic field that will isolate it from the walls. This is made possible by the magnetic properties of plasmas: naturally the positive charge of the protons is counteracted by the negative charge of the electrons, resulting in an electrically neutral particle. In a plasma, nuclei and electrons are separated, and therefore magnetizable. It is therefore possible to enclose the particles in a magnetic prison, allowing the walls to remain relatively cool thanks to the vacuum zone.


When deuterium and tritium fuse, the result is a helium atom and a neutron. The latter being neutral, it escapes from the magnetic field and hits the wall, transmitting its energy (80% of the reaction). This is how the heat is collected, then evacuated. The helium core, carrying a magnetic charge, will remain confined.
The initiative of the project is Soviet. Mikhail Gorbachev, then secretary general of the Communist Party of the USSR, presented it first to François Mitterrand at the beginning of 1985, then at the end of the year to Ronald Reagan at the Geneva summit. The idea was to create an international project to use the energy of atomic fusion. Two years later, Europe, Japan, the USSR and the United States joined forces to create ITER, followed in 2003 by China and South Korea and in 2005 by India.
After a study phase from 1988 to 2001, the location had to be chosen, which led to lengthy negotiations that culminated in 2005 in the choice of Cadarache in France. The final agreement on the construction of ITER was signed on November 21, 2006 at the Élysée Palace.
Construction began in 2007, and today (January 31, 2020) we are at 68.1% of the work to be done. The first Plasma is planned for December 2025, and after a gradual increase in power of the machine, fusion operations will begin around 2035.


DEMO, the successor machine to ITER, will be an industrial demonstration reactor based on the know-how acquired with ITER. It will allow testing of continuous operation and the generation of the tritium necessary for the reactions, directly in the reactor vessel. Without the diagnostic and analysis systems to study the operation of the machine, its design will probably be much simpler than that of ITER.
DEMO will be the very first facility to supply electricity to the grid.
It is estimated that the first fusion power plants will be operational by the middle of this century. With the widespread use of this non-CO2 emitting method of energy production, the use of electricity should become widespread in all areas drastically reducing our emissions, which would be a miracle for the environment. Although this may seem a bit idealistic, I allow myself to hope in this future...
Do not hesitate to visit the official website of ITER to have more details about the machine, the project and everything that surrounds it: https://www.iter.org/
It is also possible to visit the construction site all year long for free!
Subatomic particle, part of the atomic core. It carries a positive electric charge.
Subatomic particle, part of the atomic core. It carries a neutral electric charge.
Elementary particle, component of atoms and carrying a negative electric charge. It is responsible for the interactions between atoms.
A neutrally charged particle with almost no mass, representing a packet of electromagnetic energy exchanged when energy is absorbed or emitted by matter.
The photon can be considered both as a particle and a wave. It is responsible for electromagnetic radiation, therefore light, radio waves, gamma rays ...
Its speed in vacuum, called the speed of light, is equal to 299 792 458 m / s.
Consists of the fusion of light atoms (such as hydrogen) to form heavier ones, which is accompanied by a significant release of energy.
Consists in breaking heavy atoms (such as uranium) into several smaller ones, which is accompanied by a significant release of energy.
Energy that a body possesses as a result of its motion.
More precisely, it is the energy required to bring the object at rest.
An atom is said to be radioactive when it is unstable and can transform into another atom, while emitting particles and energy.
Noted H - lightest atom in the universe whose nucleus is composed of a single proton.
Torus designed to magnetically confine a plasma in order to perform fusion operations.
Fourth state of matter (with the solid state, the liquid state and the gaseous state), in which the electrons are separated from the atomic nucleus.
A material is superconducting when it has no electrical resistance below a certain temperature. When supplied with electricity, it will produce a very intense magnetic field without any energy loss
Noted 2H or D - isotope of hydrogen whose nucleus is composed of a proton and a neutron.
Noted 3H ou T - hydrogen isotope whose nucleus is made up of one proton and two neutrons.
Atoms sharing the same number of proton-s, but having a different number of neutrons.
Example with hydrogen:
No comment yet.
You must be logged in to comment.